Biological denitrification of high strength nitrate waste using preadapted denitrifying sludge

Denitrification of synthetic high nitrate waste containing 9032 ppm NO(3)-N (40,000 ppm NO(3)) in a time period of only 6h has been achieved in our previous study using activated sludge. The activated sludge culture was acclimatized by a stepwise increase in the nitrate concentration of synthetic waste. In the present work, studies were carried out on the changing microbial population of the sludge and the physiology of nitrate metabolism during the various stages of adaptation process to high strength synthetic nitrate waste. During the course of adaptation, with an increase in the nitrate concentration, a sharp increase in the number of denitrifiers was found with an equally rapid decrease in the nitrifying community. Two key enzymes involved in the first two steps of the denitrification process were also studied during this period. The results of the study suggest that specific enzyme levels increase as the activated sludge adapts itself to higher nitrate concentrations. Biological denitrification of high nitrate waste is a slow process and to increase the rate of denitrification, parameters such as pH, temperature, C:N and biomass concentration of the process were optimized using orthogonal array method. Optimized conditions increased the specific nitrate reduction rate by 54% and specific nitrite reduction rate by 45%.     

Sorption and mobility of ivermectin in different soils

Avermectins are widely used to treat livestock for parasite infections. Ivermectin, which belongs to the group of avermectins, is particularly hazardous to the environment, especially to crustaceans and to soil-dwelling organisms. Sorption is one of the key factors controlling transport and bioavailability. Therefore, batch studies have been conducted to characterize the sorption and desorption behavior of ivermectin in three European soils (Madrid, York, and artificial soil). The solid-water distribution coefficient (K(d)) for ivermectin sorption to the tested soils were between 57 and 396 L kg(-1) (determined at 0.1 microg g(-1)), while the organic carbon-normalized sorption coefficients (K(oc)) ranged from 4.00 x 10(3) to 2.58 x 10(4) L kg(-1). The Freundlich sorption coefficient (K(F)) was 396 (after 48 h) for the artificial soil over a concentration range of 0.1 to 50 microg g(-1), with regression constants indicating a concentration-dependent sorption. The obtained data and data in the literature are inconclusive with regard to whether hydrophobic partitioning or more specific interactions are involved in sorption of avermectins. For abamectin, hydrophobic partitioning seems to be one of the dominant types of binding, while hydrophobicity is less important for ivermectin, which is probably due to the lower lipophilicity of the molecule. Furthermore, the presence of cations such as Ca(2+) leads to decreasing sorption. Thus, it is presumed that ivermectin binds to soil by formation of complexes with immobile, inorganic soil matter. In contrast to abamectin, hysteresis could be excluded for ivermectin in the studied soils for the evaluation of sorption and desorption. The sorption mechanism is highly dependent on physicochemical properties of the avermectin.     

Magnetic mapping of fly-ash pollution and heavy metals from soil samples around a point source in a dry tropical environment

The Singrauli region in the southeastern part of Uttar Pradesh, India is one of the most polluted industrial sites of Asia. It encompasses 11 open cast coalmines and six thermal power stations that generate about 7,500 MW (about 10% of India’s installed generation capacity) electricity. Thermal power plants represent the main source of pollution in this region, emitting six million tonnes of fly-ash per annum. Fly-ash is deposited on soils over a large area surrounding thermal power plants. Fly-ashes have high surface concentrations of several toxic elements (heavy metals) and high atmospheric mobility. Fly ash is produced through high-temperature combustion of fossil fuel rich in ferromagnetic minerals. These contaminants can be identified using rock-magnetic methods. Magnetic susceptibility is directly linked to the concentration of ferromagnetic minerals, primarily high values of magnetite. In this study, magnetic susceptibility of top soil samples collected from surrounding areas of a bituminous-coal-fired power plant were measured to identify areas of high emission levels and to chart the spatial distribution of airborne solid particles. Sites close to the power plant have shown higher values of susceptibility that decreases with increasing distance from the source. A significant correlation between magnetic susceptibility and heavy metal content in soils is found. A comparison of the spatial distribution of magnetic susceptibility with heavy-metal concentrations in soil samples suggests that magnetic measurements can be used as a rapid and inexpensive method for proxy mapping of air borne pollution due to industrial activity.     

Community evacuation following a chlorine release, Mississippi

On 7th September 1986, four miles north of Collins, Mississippi, a train transporting chlorine derailed. Two cars ruptured and gas escaped. As a result, 100 families were evacuated. To study the evacuation process, we conducted person-to-person interviews with sixty-two families staying in the evacuation center. Only 52.5% of the families received their first directive to evacuate directly from police or other officials. Delays in evacuating tended to be shorter when people were warned by the police and were told the reason for evacuating. Lack of personal transportation and preexisting health problems resulted in delays in evacuation. Concerns about evacuation included fear of looting, lack of a place to go, lack of transportation, difficulty in moving with children and elderly persons, and the need to take care of pets. One third of the interviewees reported feeling panic. Community evacuation procedures would be improved if: (1) officials contact all households directly; (2) the warning message addresses people's concerns; and (3) transportation is provided.     

The Economics of Small Photovoltaic Systems for Village Energy Supply

After several years of experimentation and demonstration, photovoltaic (PV) power is now firmly established for certain applications where reliable power is required in remote locations. The technology has recently matured to the point where PV is now an appropriate, cost-effective technology for village use. This paper reviews experience and presents economic comparisons between photovoltaic and conventional power systems. It is concluded that PV is cost-effective for individual home lighting and small loads such as radios, when compared with kerosene lamps and batteries. For mutiple uses PV is cost-effective compared with diesel generators for daily electricity demands up to around 20 kWh, depending on local conditions.     

A simple and effective approach for detecting maternal cell contamination in molecular prenatal diagnosis

The presence of maternal cells in fetal samples constitutes a serious potential source for prenatal misdiagnosis. Here we present our approach for detecting maternal cell contamination (MCC) at prenatal diagnosis for eight monogenic disorders (autosomal recessive: β-thalassaemia, sickle-cell anaemia, cystic fibrosis, prelingual deafness; autosomal dominant: achondroplasia, Huntington disease, myotonic dystrophy, neurofibromatosis type I; X-linked: spinobulbar muscular atrophy). Our aim was to apply a simple and low-cost approach, which would easily and accurately provide information on the fetal tissue MCC status. MCC testing was applied to cases of recessive inheritance where the primary mutation screening of the fetus revealed the presence of the maternal mutation, to cases concerning dominant inheritance and to cases of multiple gestation. The potential presence of maternal cells was determined by the amplification of the 3′-HVR/APO B, D1S80, THO1 and VNTRI of vWf polymorphic loci, which have previously demonstrated high heterozygosity in Caucasians. Among 135 prenatal diagnoses, 44 finally needed to be tested for MCC (32.6%). MCC was detected in four cases, where DNA was isolated directly from chorionic villi samples (CVS), and in one case with DNA isolated directly from amniotic fluid (AF). In almost 90% of cases a simple test of one polymorphic locus provided sufficient information about MCC. The choice of the appropriate locus is therefore essential, while the simultaneous screening of both parents provides the means for distinguishing non-informative sites about MCC. Copyright © 2002 John Wiley & Sons, Ltd.     

Variability in larval development of the tropical reef fish Pomacentrus amboinensis (Pomacentridae): the parental legacy

The effects of food availability, female size, and social interactions on the quality of Pomacentrus amboinensis larvae at hatching were examined using two field-based experiments. In Experiment 1, food availability and female size significantly influenced size, eye diameter and levels of yolk reserves of larvae at hatching. Small females (47 to 52 mm standard length, SL) whose diets were not supplemented, produced the longest larvae (3.0 ± 0.01 mm total length, TL) with the least yolk reserves (50.1 ± 1.04 μm²). Irrespective of female size, those that received additional food produced larvae with the largest yolk-sacs (large females: 87.60 ± 1.53 μm²; small females: 80.14 ± 1.24 μm²). In Experiment 2, interactions with conspecifics had a greater affect on the somatic development of larvae at hatching than food availability. Increased social interactions resulted in larvae that were ⋍3% longer, with 2% greater head depth, than larvae from females that spawned in isolation on the experimental reefs. Fed females produced larvae with ⋍20% more yolk than larvae from females whose diets were not supplemented. All three factors (food availability, female size, and intensity of social interactions) tested within these experiments vary spatially and temporally among reefs. There is the potential, therefore, for larvae at the onset of the planktonic stage to vary in quality, level of development, and probability of survival. Received: 12 August 1996 / Accepted: 26 August 1996     

Site characteristics,growth and nutrition of natural red pine stands in newfoundland

Red pine (Pinus resinosa Ait.) is rare (< 15 000 mature trees) in Newfoundland and is known from only 22 locations in the central region. Red pine occupies 3 major site types in Newfoundland: 1) red pine on medium-textured sands (RP1), 2) red pine on coarse-textured glaciofluvial deposits (RP2), and 3) red pine on Folisols over bedrock (RP3). The succession of red pine site types after cutting is from red pine to Kalmia-black spruce (Picea mariana (Mill.) B.S.P.) for RP1, and to Cladonia-Kalmia-black spruce for types RP2 and RP3. Succession after fire is usually to the pre-fire type, but this depends on the severity of the fire.Although occupying a relatively poor site, red pine at 60–70 years reaches heights in excess of 18 m, dbh in excess of 40 cm, and individual tree volumes greater than 1 m³ were recorded in 75 stemanalyzed fire-killed trees. Black spruce on that same site produces less than one-third that volume in 60 years. Merchantable volume of 140–280 m³ ha^-1 were recorded i.e., Canada Land Inventory (CLI) forest capability class 5 and class 4 ratings. This raises the CLI rating two capability classes if red pine were occupying these poor quality sites over black spruce. In terms of nutrition, even the best growing red pine are nitrogen (N) deficient as shown by foliar analysis. All natural stands have foliar N concentrations below 1.3% which is the critically low level shown in the literature. Immediately after fire, foliar concentrations reach this level but are usually about 1% or less. Most other nutrients are low but are within the generally reported adequate levels in testing for P, K, Ca and Mg.Fire influences soil nutrient availability as pH increases in the RP1 type. Burning temperature also affects soil pH and the understory vegetation. The RP2 type loses more N in hotter burns on this site type and more N is tied up in these ortstein hardpan soils. The pattern of regeneration following wildfire is related to slope, density, age and species mixture of the stand as well as the thickness and composition of the duff layer.